This is a high performance QSFP28 transceiver module for 100 Gigabit Ethernet data links over a single mode fibre pair. The maximum reach is 500m. An internal DSP-based gearbox converts the 4 electrical input channels (each 25Gbbps NRZ) into one 50GBd PAM4 signal. The transmitter is a CWDM laser generating the optical 50GBd output signal.
The receiver is a PIN photodiode which detect the 50GBd PAM4 optical input signal. This 50GBd data stream is converted into four 25Gbps electrical output signals by the DSP.
This transceiver module is compliant with the QSFP28 Multisource Agreement (MSA) and hot pluggable.
Key Features
- QSFP28 MSA compliant
- Supports 53.125Gbaud
- IEEE 802.3cd 100GBASE-DR Specification compliant
- Up to 500m transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70℃
- 4x25G electrical interface (OIF CEI-28GVSR)
- Maximum power consumption 4.5W
- LC duplex connector
- RoHS compliant
Application
- 100G Data Center Interconnect
- 100G Ethernet
- Enterprise networking
Product Detail
It is uniquely serialized and data-traffic and application tested to ensure that they will integrate into your network seamlessly. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. We stand behind the quality of our products and proudly offer a limited lifetime warranty.
| Parameter | Symbol | Min | Typical | Max | Units | No |
| Operating Case Temperature | TOP | 0 | | 70 | degC | |
| Link Distance with OM3 | D | 0.002 | | 500 | m | |
| Power Consumption | | | | 4.5 | W | |
| Center Wavelength | λC | 1304.5 | | 1317.4 | nm | |
| Average Launch Power | PAVG | -2.9 | | 4 | dBm | |
Outer Optical Modulation
Amplitude (OMAouter) | POMA | 0.8 | | 4.2 | dBm | |
| Average Receive Power | | -5.9 | | 4 | dBm | |
| Receive Power(OMA) | | | | 4.2 | dBm | |
| Receiver Sensitivity(OMA) | SEN | | | max(-3.9,SECQ-5.3) | dBm | |
Outline Dimensions:
Innovations
The manufacturing environment is strictly compliant with most advanced technological standards, ensuring our products a long term reliability.
Quality & Assurance
Our Cutting-Edge test equipment verifies that each of our products meets our high-quality standards
Customization
Thanks to the specialists of our Engineering Department, we have full control over both the hardware and the software of all our transceivers. Need your personal labelling? No problem, just ask and we provide!
Multi-Compatibility
ColorOptic offers a true cost-effective solution for all major platforms including the original vendor firmware.
Technical Support
Any issues with your equipment? We are already dispatching an engineer to your premises to fix it. We are 7x24 hours online supports.
Product Tags:
|
|
100Gb/S QSFP28 Optical Transceiver Single Lambda 100G Ethernet Optical Transceiver Images
|
